Sensor, Coolant Temperature: Installation
WARNING: This page is about a different variant/trim than selected.
- Apply MOPAR® thread sealant with PFTE to the Engine Coolant Temperature (ECT) sensor threads.
- Install the ECT sensor (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS
.
- Connect the ECT sensor wire harness connector (2).
- Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
- Fill the cooling system. Refer to COOLING SYSTEM, STANDARD PROCEDURE .
- Connect the negative battery cable.