LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> Durango GT Plus, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Module, Wireless Charging Pad >> Removal

Module, Wireless Charging Pad: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Shifter Bezel. Refer to BEZEL, SHIFTER, REMOVAL .
  3. Remove the fasteners (1) that secure the wireless charging pad bracket (2) to the floor console (3).
    GC0200439Courtesy of CHRYSLER GROUP, LLC
  4. Lift up to disengage retainer clips to release the wireless charging pad bracket (2) from the floor console (3).
  5. Disconnect the wire harness connector and remove the wireless charging pad bracket (2).
  6. Working from the under side of the wireless charging pad bracket (3), remove the fasteners (1) and remove the wireless charging pad module (2).
    GC0200444Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals