LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 3500 Van Cargo Extended >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Removal

Heater, Engine Block: Removal

NOTE:

The engine block heater is located on the driver side towards the front of the engine.

  1. Remove the generator. Refer to GENERATOR, REMOVAL .
    GC0144482Courtesy of CHRYSLER GROUP, LLC
  2. Partially drain the coolant from the radiator and cylinder block. Refer to STANDARD PROCEDURE .
  3. Disconnect the power cord from the engine block heater.
  4. Remove the engine block heater bolt (2) and the block heater assembly (1).
scientia non olet · About LEMON Manuals