3.6L - DTCS P105B To P152C
- DTC Troubleshooting
- P105B-Intake Valve Control Solenoid 4 Circuit High
- P105C-Intake Valve Stuck In Low Lift Position
- P105D-Intake Valve Stuck In High Lift Position
- P1070-Intake Valve Control Solenoid 1 Range/Performance
- P1071-Intake Valve Control Solenoid 2 Range/Performance
- P1072-Intake Valve Control Solenoid 3 Range/Performance
- P1073-Intake Valve Control Solenoid 4 Range/Performance
- P1115-General Temperature Rationality
- P1128-Closed Loop Fueling Not Achieved - Bank 1 Upstream
- P1129-Closed Loop Fueling Not Achieved - Bank 2 Upstream
- P1239-Engine Oil Temperature Too Low
- P1300-Crankshaft Position Learn Out Of Range
- P1400-Aftermarket Calibration Detected/Warranty Coverage Confirmation Required
- P1404-EGR Close Position Performance
- P141B-Starter Control 1 Circuit Performance
- P141C-Starter Control 2 Circuit Performance
- P141D-Starter Relay Feedback Open Circuit Performance
- P1456-Fuel Tank Pressure Sensor Circuit Low
- P1457-Fuel Tank Pressure Sensor Circuit High
- P1495-Left Front SEATBELT Switch Circuit High
- P1496-Left Front SEATBELT Switch Circuit Low
- P1524-Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled
- P152C-Engine Hood Switch 2 Circuit Range/Performance