Torque Specifications
WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| ABM to HCU Mounting Screws | 6 | - | 53 | |
| Brake Caliper Adapter to Knuckle Bolts - Front | 164 | 120 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Brake Caliper Adapter to Knuckle Bolts - Rear | 118 | 87 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Brake Caliper Center Support Bolt - Front - SRT8 | 30 | 22 | - | |
| Brake Caliper to Knuckle Bolts - Front - SRT8 | 163 | 121 | - | |
| Brake Caliper to Knuckle Bolts - Rear - SRT8 | 133 | 98 | - | |
| Brake Caliper Guide Pin Bolts - Front | 60 | 44 | - | |
| Brake Caliper Guide Pin Bolts - Rear | 31 | 23 | - | |
| Brake Hose to Brake Caliper Banjo Bolt - Front | 58 | 43 | - | |
| Brake Hose to Brake Caliper Banjo Bolt - Rear | 35 | 26 | - | |
| Brake Hose to Brake Caliper Banjo Bolt - Front - SRT8 | 43 | 32 | - | |
| Brake Hose to Brake Caliper Banjo Bolt - Rear - SRT8 | 36 | 27 | - | |
| Front Brake Hose Bracket to Front Wheelhouse | 9 | - | 80 | |
| Front Brake Hose Support Bracket Bolt | 11 | 8 | - | |
| Front Brake Hose Bracket to Knuckle SRT8 | 12 | 9 | - | |
| Rear Brake Hose Bracket to Wheel House Inner | 14 | 10 | - | |
| Rear Brake Line to ICU | 23 | 17 | - | |
| Rear Brake Line to Hose | 20 | 15 | - | |
| Brake Pedal/Booster Nuts | 25 | 18 | - | |
| Brake Tube Nuts | 32 | 24 | - | |
| Front Brake Tube to ABS Unit Bolt | 23 | 17 | - | |
| Front Brake Tube to Right Front Brake Hose | 16 | 12 | - | |
| Brake Tubes to Rails | 14 | 10 | - | |
| Dynamic Sensor Mounting Nuts | 7 | - | 62 | |
| Electric Vacuum Pump to Bracket Bolts | 8 | - | 71 | |
| ICU to Bracket Bolts | 11 | 8 | - | |
| Master Cylinder Mounting Nuts | 24 | 17 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Primary Brake tube to ICU | 40 | 30 | - | |
| Secondary Brake Tube to ICU | 28 | 21 | - | |
| Front Brake Tube to ICU | 23 | 17 | - | |
| Parking Brake Cable to Knuckle Bolt | 10 | 7 | - | |
| Park Brake Anchor to Knuckle | 60 | 44 | - | |
| Parking Brake Lever to Body Nuts | 28 | 20 | - | |
| Parking Brake Lever to Body Bolts | 30 | 22 | - | |
| Park Brake Cable to Subframe | 12 | 9 | - | |
| Park Brake Cable to Underbody | 10 | 7 | - | |
| Wheel Speed Sensor Head to Knuckle Bolt - Front | 11 | 8 | - | |
| Wheel Speed Sensor Head Knuckle Bolt - Rear | 11 | 8 | - |