Control Circuit Testing
WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - The starter relay is located within the PDC. Refer to DIAGNOSIS AND TESTING .
- Starter Solenoid - Refer to Starter Motor Diagnosis and Testing.
- Ignition Switch - Refer to Ignition Switch and Key Lock Cylinder
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to SWITCH, CLUTCH STARTER INTERLOCK .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to Park/Neutral Position Switch in 8HP50/850RE AUTOMATIC TRANSMISSION (SERVICE INFORMATION) or 8HP70 AUTOMATIC TRANSMISSION (SERVICE INFORMATION) or 8HP90 AUTOMATIC TRANSMISSION (SERVICE INFORMATION) .
- Wire harnesses and connections - Refer to Wiring Diagrams.