LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster City SLT >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Fuel System) >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Throttle Outlet

Throttle Outlet

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0170326Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (1).
  3. Disconnect the TMAP sensor wire harness connector (3).
  4. Remove the screw (2) and the TMAP sensor (1) from supercharger.
scientia non olet · About LEMON Manuals