Sensor, Coolant Temperature: Installation: 5.7L/6.4L
WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
- Apply MOPAR® thread sealant with PFTE to the Engine Coolant Temperature (ECT) sensor threads.
- Install the ECT sensor (2) and tighten to the proper specification. Refer to 5.7L/6.4L TORQUE SPECIFICATIONS .
- Connect the ECT sensor wire harness connector (3).
- Install air cleaner body. Refer to INSTALLATION - 5.7L or INSTALLATION - 6.4L .
- Install the engine cover.
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Connect the negative battery cable.