LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster City SLT >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.6L

Sensor, Coolant Temperature: Installation: 3.6L

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0169778Courtesy of CHRYSLER GROUP, LLC
  1. Install the ECT sensor (2) and tighten to the proper specification. Refer to 3.6L TORQUE SPECIFICATIONS .
  2. Connect the ECT sensor wire harness connector.
  3. Fill the cooling system. Refer to STANDARD PROCEDURE .
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals