LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster City SLT >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Power Windows (Service Information)) >> Switch, Power Window >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 RAM ProMaster City. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the door handle rod to the switch bezel.
  2. Attach the handle rod tether to the rod. Slide the pin through the hole.
  3. Connect the wiring harness connector to the bezel.
  4. Snap the bezel into place in the door panel.
  5. Install both screws securing the bezel to the door panel.
  6. Snap both bolt covers in place.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals