Torque Specifications
WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Driveshaft to Transmission Flange Bolts/Nuts (Non- SRT8) | 66 | 49 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Driveshaft to Transmission Flange Bolts/Nuts (SRT8 & Manual) | 66 | 49 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Driveshaft to Rear Axle Flange Bolts/Nuts (Non- SRT8) | 66 | 49 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Driveshaft to Rear Axle Flange Bolts/Nuts (SRT8 & Manual) | 66 | 49 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Center Bearing to Body Bolts | 28 | 21 | - | - |
| Front Driveshaft to Axle Bolts/Nuts | 61 | 45 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Front Driveshaft to Transfer Case Flange Bolts/Nuts | 61 | 45 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |