Charging System (Service Information): Generator: Installation: 3.6L

Install the generator into the vehicle.
Install the three mounting retainers.
Tighten to the proper torque specification. Refer to TORQUE SPECIFICATION .

Courtesy of CHRYSLER GROUP, LLC
Install ground wire on mounting stud (4).
Install the lower front ground wire mounting nut (5).
Tighten to the proper torque specification. Refer to TORQUE SPECIFICATION .
Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
Plug in the field circuit (3) to the generator.
Connect the B+ terminal nut (1) and wire (2).
Connect the negative battery cable and tighten the nut to the proper torque specification. Refer to TORQUE SPECIFICATIONS .