LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> Durango SXT, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Abs) (Service Information) >> Electrical >> Sensor, Wheel Speed, Front >> Removal

Sensor, Wheel Speed, Front: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    NOTE:

    Wheel removed for clarity.

    GC0146145Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The inner wheel well can be pulled out slightly for access to the wire harness connector without removing the wheel well retainers.

  2. Disconnect the wheel speed sensor wire harness connector (1).
  3. Disconnect the wheel speed sensor wire routing clips (2, 3).
  4. Remove the wheel speed sensor wire (4) from the brake flex hose bracket.
    GC0173604Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the sensor wire routing clips from the brake hose.
  6. Remove the wheel speed sensor wire (3) from the knuckle (4).
  7. Remove the front wheel sensor mounting bolt (2) and remove the sensor (1) from the knuckle (4).
scientia non olet · About LEMON Manuals