Valve, Short Runner: Installation
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not reuse the old Short Runner Valve (SRV) actuator O-ring seal (1).
- Install a new
SRV actuator rubber O-ring seal (1).
- Install the SRV actuator (2). Tighten bolts (1) to the proper specification. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
- Install the intake manifold. Refer to MANIFOLD, INTAKE, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.