Engine Block: FLEXPLATE: Installation

WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Position the flexplate (3) onto the crankshaft.
Install the spacer (2) and the bolts (1) hand tight.
Tighten the flexplate retaining bolts (1) in a criss-cross pattern to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
CAUTION:
Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.
Install the transmission. Refer to INSTALLATION .