Battery, AGM: Removal
- If equipped with power seats, move the passenger seat to the most forward and upright position.
- If equipped with manual seats, move the passenger seat to the most forward position.
- Cycle the ignition to the Off position. Be certain that all electrical accessories are turned off.
- Remove the battery cover (1).
- Disconnect and isolate the negative battery cable by removing only the captive nut securing the terminal end to the post.NOTE:
If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Disconnect the positive battery cable and position aside.
- Remove the battery thermal blanket (1).
- Remove the battery holddown retainers (2) and remove the battery holddown (1).WARNING:
Wear a suitable pair of rubber gloves when removing a battery by hand. Safety glasses should also be worn. If the battery is cracked or leaking, the electrolyte can burn the skin and eyes.
- Remove the battery from the vehicle.