LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.6L Engine (Service Information)) >> Engine Block >> Damper, Vibration >> Removal

Damper, Vibration: Removal

WARNING: This page is about a different variant/trim than selected.
GC0144221Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
    NOTE:

    A force greater than 350 N. m (260 ft. lbs.) may be required to remove the crankshaft vibration damper bolt.

  2. Hold the crankshaft vibration damper (1) with Vibration Damper Holder (special tool #10198, Holder, Vibration Damper) (2) and remove the crankshaft vibration damper bolt.
  3. Pull the crankshaft vibration damper (1) from the crankshaft.
scientia non olet · About LEMON Manuals