5.7L Single Fan

NOTE:

If replacing the fan blades, the dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

When installing the cooling fan assembly, care must be used so that the fan shroud does not contact the radiator or the radiator fins. Damage may cause leaking.

Install the cooling fan assembly in the vehicle.
Align the lower cooling fan assembly mounting tabs (1) with the radiator mounts (2).
Tighten the lower radiator support bolts to the proper torque specification. Refer to 5.7L/6.4L TORQUE SPECIFICATIONS .
Install the belly pan. Refer to BELLY PAN, INSTALLATION .
Remove the support and lower the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Install the cooling fan assembly mounting bolts (3) and tighten to the proper torque specification. Refer to 5.7L/6.4L TORQUE SPECIFICATIONS .
Connect the cooling fan wire harness connector (1).
Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
Connect the negative battery cable.
Operate the engine until it reaches normal operating temperature. Check the fan for proper operation.