Module, Radio Antenna: Installation: Module

Courtesy of CHRYSLER GROUP, LLC

1. Position the antenna module (7) to the roof rear header panel (1) in the vehicle.
2. Engage the right mounting tab of the antenna module into the slot (2) in the roof rear header panel.
3. Engage the left mounting tab of the antenna module onto the weld stud (3) on the roof rear header panel.
4. Install the fastener (8) that secures the left mounting tab of the antenna module to the weld stud on the roof rear header panel. Tighten the fastener securely.
5. Engage the antenna module pigtail wire retainer (6) into the slot in the roof rear header panel.
6. Connect the antenna module pigtail wire harness connector (5) to the on-glass antenna grid terminal (4).
7. Connect the body wire harness connector (9) to the antenna module.
8. Install the headliner onto the inner roof panel. Refer to HEADLINER, INSTALLATION .
9. Install the rear seat back into the vehicle. Refer to SEAT BACK, REAR, INSTALLATION .
10. Connect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.