LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> Challenger SRT Hellcat, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Fan, Cooling >> Removal >> 3.6L Single Fan

3.6L Single Fan

GC0144488Courtesy of CHRYSLER GROUP, LLC
NOTE:

If replacing the fan blades, the dual fan blades can be replaced separately from the motor. Single motor fan blades are balanced to the motor and must be replaced as a fan/motor assembly.

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner resonator. Refer to RESONATOR, AIR CLEANER, REMOVAL .
  3. Disconnect the cooling fan wire harness connector (1).
  4. Remove the upper cooling fan bolts (3).
  5. Remove the cooling fan assembly.
scientia non olet · About LEMON Manuals