LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Fuel System) >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Bank 2

Bank 2

WARNING: This page is about a different car, the 2020 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0170176Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the right side PCV hose (2) from the supercharger and position aside.
    GC0170244Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (2).
  4. Disconnect the TMAP sensor wire harness connector (1).
  5. Remove screw (3) and the TMAP sensor (2) from supercharger.
scientia non olet · About LEMON Manuals