LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> ProMaster 2500 >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Pump >> Installation >> Installation 3.0L Diesel Engine

Installation 3.0L Diesel Engine

  1. Using a lint free towel, wipe the power steering pump opening, the power steering pressure line end and the power steering pump port.
  2. Install a new O-ring. Lubricate the O-ring with clean power steering fluid.
    GC0161989Courtesy of CHRYSLER GROUP, LLC
  3. Position the power steering pump in the engine and install the two power steering pump bolts (1). Tighten the power steering pump bolts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0162061Courtesy of CHRYSLER GROUP, LLC
  4. Install the power steering pressure hose (1) with new washers. Tighten the power steering pressure line to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0161844Courtesy of CHRYSLER GROUP, LLC
  5. Install the power steering return hose (1).
  6. Fill and bleed the power steering system. Refer to STANDARD PROCEDURE .
  7. Check for leaks.
scientia non olet · About LEMON Manuals