Torque Specifications
WARNING: This page is about a different car, the 2020 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Front Active Damping Sensor Bolt | 10 | - | 89 | |
| Hub And Bearing Bolts AWD | 68 | 50 | - | |
| Hub And Bearing Bolts RWD | 100 | 74 | - | |
| Hub Nut - AWD | 213 | 157 | - | |
| Hub Nut - RWD | 230 | 170 | - | |
| Lower Ball Joint to Knuckle Nut | 37 + 180° | 27 + 180° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm to Cradle Bolt and Nut | 185 | 136 | - | |
| Lower Control Arm to Cradle Bolt and Nut (AWD) | 175 | 129 | - | |
| Rear Active Damping Sensor Bolt | 10 | - | 89 | |
| Shock Absorber Shaft Nut | 100 | 74 | - | |
| Stabilizer Bar to Crossmember Bolts | 65 | 48 | - | |
| Stabilizer Bar Heat Shield to Crossmember Bolts | 5 | - | 44 | |
| Stabilizer Link to Stabilizer Bar Nut | 135 | 100 | - | |
| Stabilizer Link to Strut Nut | 150 | 111 | - | |
| Strut Clevis to Lower Control Arm | 170 | 125 | - | |
| Strut Clevis to Strut Pinch Bolt | 61 | 45 | - | |
| Strut Mount to Body Nut | 27 | 20 | - | |
| Strut to Lower Control Arm Bolt | 174 | 128 | - | |
| Tension Strut to Cradle Bolt and Nut | 178 | 131 | - | |
| Tension Strut to Knuckle Bolt and Nut | 37+ 180° | 27+ 180° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Upper Ball Joint to Knuckle Nut | 40 + 90° | 30 + 90° | - | |
| Upper Control Arm to Body Bolt and Nut | 90 | 66 | - |