Outlet, Power, 12 V: Removal
NOTE:
Both front and rear 12 volt outlets are removed the same way.
| 1 - POWER OUTLET RETAINING CLIPS |
| 2 - POWER OUTLET CONNECTOR |
| 3 - POWER OUTLET |
| 4 - SPECIAL TOOL 9857 - POWER OUTLET REMOVER |
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Using special tool (special tool #9857, Remover, Power Outlet) Power Outlet Remover. Insert the tool with tips against bosses.
- Pull out the base through mounting ring by gently rocking pliers.
- Disconnect the wire harness connector.