LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> ProMaster 1500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control (ADCM) >> Installation

Module, Active Damping Control (ADCM): Installation

WARNING: This page is about a different car, the 2020 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
GC0162427Courtesy of CHRYSLER GROUP, LLC
  1. Place the Active Damping Control Module (ADCM) (3) into position and install and tighten securely the ADCM retaining screws (2).
  2. Connect the wire harness connectors (1) to the ADCM (3).

    Install the inner left rear wheel well carpet. Refer to CARPET, INSTALLATION .

  3. Connect the negative battery cable.
  4. Perform the ADCM Verification Test. Refer to ADCM VERIFICATION TEST .
scientia non olet · About LEMON Manuals