Insulator, Engine Mount, Right: Installation

Courtesy of CHRYSLER GROUP, LLC

1. If removed, install the right engine mount bracket (1) and tighten bolts (2 and 3) to:
   • Tighten M10 bolts (2) to 55 N.m (41 ft. lbs.).
   • Tighten M8 bolt (3) to 25 N.m (18 ft. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the right engine mount (2). Tighten nuts (1) to 95 N.m (70 ft. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

3. Hand start the engine mount to engine bracket bolts (1). Tighten bolts (1) to 80 N.m + 45° (59 ft. lbs. + 45°).
4. Remove the floor jack.
5. If removed, install the belly pan.

   Courtesy of CHRYSLER GROUP, LLC

6. Install the air intake resonator. Refer to RESONATOR, AIR CLEANER, INSTALLATION .
7. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).