LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Journey SE Value >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Spark Plug >> Installation >> 2.4L

Spark Plug: Installation: 2.4L

GC0082372Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Handle the spark plugs with care. Do not drop or force the spark plugs into the wells, damage to the electrodes or porcelain body may occur. Always start each spark plug by hand in order to avoid cross-threading the spark plug in the cylinder head.

Always tighten spark plugs to the specified torque. Too much or not enough torque will cause damage to the cylinder head or spark plug and may lead to poor engine performance.

  1. Install each spark plug to the cylinder head. Tighten the spark plugs to the proper torque specifications. Refer to TORQUE SPECIFICATIONS  .
    GC0082371Courtesy of CHRYSLER GROUP, LLC
  2. Install ignition coil onto spark plug.
    GC0082370Courtesy of CHRYSLER GROUP, LLC
  3. Install the ignition coil mounting bolt and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  4. Connect ignition coil electrical connectors.
  5. Connect the negative battery cable.
  6. Install the engine cover.
scientia non olet · About LEMON Manuals