Module, Integrated Center Stack Screen (ICSSM): Installation: Base

Courtesy of CHRYSLER GROUP, LLC

1. Position the Integrated Center Stack (ICS) screen module into the instrument center bezel.
2. Install the ICS module retainers (1).

   Courtesy of CHRYSLER GROUP, LLC

3. Connect the wire harness connectors (1 and 2) to the rear of the ICS screen module (3).

   Courtesy of CHRYSLER GROUP, LLC

4. Carefully connect the 40-way connector.

   Courtesy of CHRYSLER GROUP, LLC

5. Install the instrument panel center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.