LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Journey Crossroad >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Drivetrain Control (DTCM) >> Removal

Module, Drivetrain Control (DTCM): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the lower front closeout panel.
    GC0173987Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical wire harness connector (1).
  4. Remove the Drivetrain Control Module (DTCM) fasteners (2).
  5. Remove the DTCM (3).
scientia non olet · About LEMON Manuals