LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango SXT Plus, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

GC0144482Courtesy of CHRYSLER GROUP, LLC
  1. Thoroughly clean the cylinder block heater cavity and seat.
  2. Install the block heater (1) and tighten the bolt (2) to the proper specifications. Refer to TORQUE SPECIFICATIONS GAS 
  3. Attach the power cord plug to the block heater.
  4. Fill the cooling system to the proper level. Refer to COOLANT SYSTEM AIR EVACUATION 
    GC0145963Courtesy of CHRYSLER GROUP, LLC
  5. Install the A/C compressor. Refer to 3.6L ENGINE
scientia non olet · About LEMON Manuals