Mp2010 Transfer Case (Service Information): Removal
- Raise vehicle.
- Remove drain plug (1) and drain fluid.
- Reinstall drain plug and tighten to specifications. Refer to SPECIFICATIONS
.CAUTION:
Do not allow propshafts to hang at attached end. Damage to joint can result.
- Remove the front and rear driveshafts. Refer to SHAFT, DRIVE, FRONT and SHAFT, DRIVE, REAR, REMOVAL .
- Support transmission with jack stand.
- Remove rear crossmember and skid plate, if equipped. Refer to CROSSMEMBER, TRANSMISSION, REMOVAL .
- Support transfer case with transmission jack and secure with chains.
- Remove all bolts (2) attaching transfer case to transmission (1).
- Pull transfer case and jack rearward to disengage transfer case.
- Remove transfer case from under vehicle.