Valve Body: Disassembly

Courtesy of CHRYSLER GROUP, LLC

Unplug the electrical connectors (1, 2) at the valve body.

Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1) at the transfer plate (2) and remove the transfer plate.

Courtesy of CHRYSLER GROUP, LLC
Turn valve body over and remove the solenoid module (1) from the valve body (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1) at the line pressure sensor (2).
Remove the line pressure sensor from the valve body.

Courtesy of CHRYSLER GROUP, LLC
Remove the bolt (1) at the pressure control solenoid (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the fasteners (1) at the clamping plate (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the clamping plate (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the valve body cover (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the valve body inner gasket and plate (1) from the valve body.

Courtesy of CHRYSLER GROUP, LLC

NOTE:
The valve body contains some check balls that are pressed into a tapered bore (1). These check balls are not removable.

NOTE:
Locations of check balls are very important. Please note the location of these check balls for proper installation.

Remove the check balls (2) if equipped.

Courtesy of CHRYSLER GROUP, LLC

62TE VALVE BODY EXPLODED

1.	CONVERTER CLUTCH SWITCH VALVE
2.	L/R SWITCH VALVE
3.	SOLENOID SWITCH VALVE
4.	DC SWITCH VALVE
5.	LC SWITCH VALVE
6.	MANUAL VALVE
7.	PRESSURE REGULATOR VALVE
8.	TORQUE CONVERTER REGULATOR VALVE
9.	CONVERTER CLUTCH CONTROL VALVE

NOTE:

Use exploded view for disassembly.

NOTE:

Tag all valve/spring assemblies for reassembly identification.