LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> ProMaster 2500 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission (Service Information) >> Cable, Shift >> Adjustments >> Verification

Cable, Shift: Adjustments: Verification

  1. Place gearshift lever in gated park (P).
  2. Attempt to move vehicle by rocking back and forth on level ground. If vehicle does not move, attempt to start engine. If engine starts, the park position is correct.
  3. Set parking brake.
  4. Turn key to on/run and depress brake pedal. Place gearshift lever in neutral (N).
  5. Attempt to start engine. If engine starts in both neutral (N) or park (P), gearshift cable is adjusted properly. No adjustment is required.
  6. If engine does not start in either park (P) or neutral (N), perform adjustment procedure.
scientia non olet · About LEMON Manuals