LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> Grand Caravan SXT, Gas >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Installation >> 2.8L Diesel

2.8L Diesel

GC0124847Courtesy of CHRYSLER GROUP, LLC
  1. Position power steering pump (2) on engine.
  2. Using a floor jack, lift the right side of the engine only high enough to install the pump mounting bolts in the next step.
  3. Install three power steering pump mounting bolts (1) using openings in pulley. Tighten pump mounting bolts to 23 N.m (17 ft. lbs.).
    GC0124855Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine mount bracket fasteners (1) and (4) and tighten to 54 N.m (40 lbs.ft.).
  5. Install accessory drive belt. Refer to the appropriate service information.
    GC0125603Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Before installing power steering pressure hose on power steering pump, replace O-ring on end of power steering pressure hose. Lubricate O-ring using clean power steering fluid.

  6. Install pressure hose (1) into pump (2) fitting. Thread pressure hose tube nut into pump and tighten to 31 N.m (23 ft. lbs.).
    GC0125602Courtesy of CHRYSLER GROUP, LLC
  7. Slide fluid supply hose (3) onto pump (4) fitting and install clamp securing it in place.
  8. Connect negative (-) battery cable on negative battery post.
  9. Fill and bleed power steering system. Refer to STANDARD PROCEDURE .
  10. Inspect for leaks.
scientia non olet · About LEMON Manuals