LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> Charger SXT, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System (Service Information) >> Retainer, Battery >> Installation

Retainer, Battery: Installation

GC0079993Courtesy of CHRYSLER GROUP, LLC
  1. Install the battery holddown clamp and bolt. Tighten the bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the negative battery cable to the Intelligent Battery Sensor (IBS) M8 stud and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install the rear compartment floor trim panel.
scientia non olet · About LEMON Manuals