LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> Challenger SRT Hellcat, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Radio Frequency (RF Hub) >> Removal

Module, Radio Frequency (RF Hub): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear shelf trim panel. Refer to PANEL, REAR SHELF, REMOVAL .
    GC0170521Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Remote Frequency Hub (RF-Hub) retainers (1).
  4. Disconnect the RF-Hub wire harness connectors.
  5. If equipped, disconnect the Remote Start Antenna (RSA) (3).
  6. Remove the RF-Hub from the vehicle.
scientia non olet · About LEMON Manuals