LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2019 >> Challenger SRT Hellcat, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Active Damping Control (ADCM) >> Installation

Module, Active Damping Control (ADCM): Installation

GC0162427Courtesy of CHRYSLER GROUP, LLC
  1. Place the Active Damping Control Module (ADCM) (3) into position and install the three ADCM retaining screws (2). Tighten to the proper
  2. Install the retaining screws (2) and tighten to 9 N.m (80 in. lbs.).
  3. Connect the wire harness connectors (1) to the ADCM (3).

    Install the inner left rear wheel well carpet. Refer to CARPET, INSTALLATION .

  4. Connect the negative battery cable.
  5. Perform the ADCM Verification Test.
scientia non olet · About LEMON Manuals