LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal

Sensor, Boost Pressure: Removal

  1. Disconnect the negative battery cable.
  2. Remove the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, REMOVAL .
    GC0161813Courtesy of CHRYSLER GROUP, LLC
  3. Loosen clamp and remove the Charge Air Cooler (CAC) hose from the EGR air flow control valve elbow.
    GC0161807Courtesy of CHRYSLER GROUP, LLC
  4. Clean area around the boost pressure sensor.
  5. Disconnect the boost pressure sensor wire harness connector (1).
    GC0162085Courtesy of CHRYSLER GROUP, LLC
  6. Remove bolt (2) and the boost pressure sensor (1).
scientia non olet · About LEMON Manuals