LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> ProMaster 1500 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery, Diesel >> Sensor, Fuel Pressure >> Installation

Sensor, Fuel Pressure: Installation

GC0161956Courtesy of CHRYSLER GROUP, LLC
WARNING:

Diesel fuel is under extreme pressure in the high pressure side of the fuel injection system between the fuel injectors and the high pressure fuel pump. This may be as high as 1800 bar (26, 106 psi.). Use extreme caution when inspecting for leaks in the high pressure side of the fuel injection system. Fuel under this amount of pressure can penetrate skin causing personal injury or death. Inspect for high pressure fuel leaks with a sheet of cardboard. Wear safety goggles and adequate protective clothing when servicing the high pressure side of the fuel system. 

  1. Install the fuel pressure sensor (1) and tighten to 70 N.m (52 ft. lbs.).
    GC0162051Courtesy of CHRYSLER GROUP, LLC
  2. Connect the fuel pressure sensor wire harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.