LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Thermostat >> Installation >> 3.6L Coolant Crossover

3.6L Coolant Crossover

GC0173794Courtesy of CHRYSLER GROUP, LLC
  1. Clean gasket sealing surfaces.
  2. Install a NEW  gasket (1) onto the coolant crossover.
    GC0173701Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The shorter M6 mounting bolts (2), bolt directly to the engine timing cover.

  3. Install the coolant crossover. Using the tightening sequence shown in illustration, tighten the bolts to the proper specifications, refer to TECHNICAL SPECIFICATIONS .
    GC0173704Courtesy of CHRYSLER GROUP, LLC
  4. Install the heater supply hose to the coolant crossover (1).
  5. Install the thermostat housing, refer to THERMOSTAT, INSTALLATION .
scientia non olet · About LEMON Manuals