Heater, Engine Block: Installation: 5.7L/6.2L/6.4L

Courtesy of CHRYSLER GROUP, LLC

1. Thoroughly clean the cylinder block core hole and the block heater seat.
2. Insert the block heater assembly (2) into the engine block.
3. Tighten the bolt (3) to the proper torque specifications. Refer to 6.2L TORQUE SPECIFICATIONS  or 5.7L/6.4L TORQUE SPECIFICATIONS .
4. Connect the power cord to the block heater.
5. Install the belly pan. Refer to BELLY PAN, INSTALLATION .