LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Fan, Cooling >> Removal >> 6.4L Dual Fan

6.4L Dual Fan

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
  3. Remove the throttle body. Refer to THROTTLE BODY, REMOVAL .
  4. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  5. Remove the lower closeout panel.
  6. Drain the cooling system. Refer to STANDARD PROCEDURE .
  7. Remove the support and lower the vehicle.
    GC0148460Courtesy of CHRYSLER GROUP, LLC
  8. Remove the oil cooler supply hose (4) from the thermostat housing (2).
  9. Remove the upper radiator hose (2).
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  10. Disconnect the cooling fan wire harness connector (1).
  11. Remove bolts (2) and the radiator cooling fan assembly (3) from vehicle.
    GC0144322Courtesy of CHRYSLER GROUP, LLC
  12. Removing the fan motor wiring harness (5) from the fan shroud (6).
  13. Remove nut and the fan blade (4) from the fan motor.
  14. Remove the bolts (2) that support the fan motor to the shroud.
scientia non olet · About LEMON Manuals