LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Challenger SXT Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Front Axle) >> Fluid >> Standard Procedure >> Standard Procedure - Fluid Fill

Standard Procedure - Fluid Fill

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0081451Courtesy of CHRYSLER GROUP, LLC
  2. Remove axle fill plug (1).
  3. Fill axle with 600ml (0.64 qts.) of Mopar® 75W-90 Synthetic Gear Lubricant. Fluid should be within 3/16" of bottom of fill hole.
  4. Install the axle fill plug and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals