LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Wheel Alignment >> Standard Procedure >> Wheel Alignment >> Notes

Wheel Alignment: Notes

NOTE:

Wheel alignment must be checked and adjusted to the preferred specifications with the vehicle at Curb Height.

  1. Place vehicle on wheel alignment rack or drive-on lift per equipment manufacturer's recommendations.
  2. Perform pre-wheel alignment inspection. Refer to PRE-WHEEL ALIGNMENT INSPECTION  .
  3. Set vehicle to specified Curb Height  . Refer to CURB HEIGHT MEASUREMENT  .
  4. Remove Suspension Height Measurement tools from vehicle.
  5. Attach wheel alignment equipment following equipment manufacturer's instructions.
    NOTE:

    Align the vehicle starting with the rear suspension, then proceed to the front suspension. Always set toe last.

  6. Proceed with Camber And Caster Angle.
scientia non olet · About LEMON Manuals