LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Removal >> Removal

Sensor, Camshaft Position: Removal: Removal

  1. Disconnect and isolate the negative battery cable.
    Fig 1: Cowl Screen Panel
    GC0135294Courtesy of CHRYSLER GROUP, LLC
  2. Remove the wiper cowl panel (3) Refer to COVER, COWL PANEL, REMOVAL .
    Fig 2: Identifying Sensor Electrical Connectors
    GC0135289Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the camshaft position sensor (1) electrical connector.
    Fig 3: View Of Camshaft Position Sensor
    GC0135295Courtesy of CHRYSLER GROUP, LLC
  4. Remove the sensor mounting bolt (1).
  5. Carefully twist and pull the camshaft position sensor (2) from the engine block (3).
scientia non olet · About LEMON Manuals