LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Viper Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Air Temperature, Inlet >> Removal

Sensor, Air Temperature, Inlet: Removal

GC0135748Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Take care not to damage the sensor when removing to the air inlet hose.

NOTE:

Left inlet air temperature sensor shown the right side removed the same way.

  1. Disconnect and isolate negative battery cable at battery.
  2. Disconnect the electrical connector (1) from the inlet air temperature sensor (2).
  3. Remove bolts (3) and sensor (2) from air inlet hose.
scientia non olet · About LEMON Manuals