LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.6L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Installation

Engine Block: FLEXPLATE: Installation

WARNING: This page is about a different variant/trim than selected.
GC0144180Courtesy of CHRYSLER GROUP, LLC
  1. Position the flexplate (3) onto the crankshaft.
  2. Install the spacer (2) and the bolts (1) hand tight.
  3. Using a criss-cross pattern, tighten the flexplate to crankshaft retaining bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  4. Install the transmission.
scientia non olet · About LEMON Manuals