Valve, Short Runner: Installation
NOTE:
Do not reuse the old Short Runner Valve (SRV) actuator O-ring seal (1).
- Install a new
SRV actuator rubber O-ring seal (1).
- Install the SRV actuator (2). tighten bolts (1) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the intake manifold. For 3.6L Refer to MANIFOLD, INTAKE, INSTALLATION For 5.7L Refer to INSTALLATION For 6.2L Refer to SUPERCHARGER SYSTEM For 6.4L Refer to MANIFOLD, INTAKE, INSTALLATION .
- Connect the negative battery cable.