LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Challenger SXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1770 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control (ADCM) >> Removal

Module, Active Damping Control (ADCM): Removal

WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
GC0162427Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the left rear wheel well carpet. Refer to CARPET, REMOVAL .
  3. Disconnect the two wire harness connectors (1) and remove the three screws (2) from the Adaptive Damping Control Module (ADCM) (3).
  4. Remove the ADCM from the vehicle.
scientia non olet · About LEMON Manuals