LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Pump, Water >> Removal >> 6.2L

Pump, Water: Removal: 6.2L

  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
  3. Drain the cooling system. Refer to STANDARD PROCEDURE .
    GC0144611Courtesy of CHRYSLER GROUP, LLC
  4. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
  5. Remove bolt (1) and the heater tube (3) from the water pump.
  6. Disconnect the Engine Coolant Temperature (ECT) sensor wire harness connector (2).
    GC0170066Courtesy of CHRYSLER GROUP, LLC
  7. Remove the bolt (1) and the idler pulley (2).
    GC0170458Courtesy of CHRYSLER GROUP, LLC
  8. Remove the bolt (1) and the belt tensioner assembly.
    GC0170392Courtesy of CHRYSLER GROUP, LLC
  9. Remove the upper radiator hose from the thermostat housing (2) and position aside.
  10. Remove lower radiator hose from the water pump and position aside.
  11. Remove the upper stud bolt.
  12. Remove the water pump mounting bolts (1) and carefully remove pump.
scientia non olet · About LEMON Manuals